What I want to teach this issue is a bucket bag
Classic shape, pursue simple and practical fashion attitude
Small exquisite barrel bag lack of ownership
“A large capacity”
Difficulty: Novice Getting Started
The tools and materials required
The required materials are: tablet, library, ribbon, rough laying cotton, paper lining, drawing rope, skin buckle. Bag and zipper
Tip: 15cm metal and 20cm resin each, the color is best similar to the body.
(You can choose the color of the fabric)
The bucket bag steps are as follows
step 1 –
Turn the thick side of the tadpole with the side of the tablet, iron it with an iron (the front of the surface is hot towards the iron, because the cotton can not iron at high temperature), ironing the back of the paper lining and the back of the lilies, (Paper lining towards the iron hot plate).
Step 2 –
Remove the well -ironed tables just now, and opposite a rectangular surface cloth with its front. The grooves on the cotton in one side are fixed. (The cloth position and the groove position are at least together
Step 3 –
Turn to a cotton noodles and squeeze a circle along the side of the slot.
Step 4 –
After sewing, two layers of fabrics are cut in the middle, and the two ends are cut into triangles. Be careful not to cut to the line.
Step 5 –
From the cutting gap, turn the fabric into it, turn it inside, fix the bag with a bead needle, place the zipper at the groove, and sew the zipper along the edge of the gap.
Step 6 –
Turn to the side of the cotton, fold the bag in the bag, and suture the three sides of the bag in the bag.
Step 7 –
Fold the front fabric, be sure to pay attention to the cotton, and then suture the side.
Step 8 –
Pull the sutured side to the front, fold the sharp corners with the gap, and suture the angle. (Specifically, please refer to the corner of the previous golden bag)
Step 9 –
Take out the previously ironed Libu, and install the inner pocket cloth and zipper according to the previous method of installing the zipper.
– Step 10 –
Switch the lubu to the folding corner at the gap.
Step 11 –
Put the front of the two bags on the front, and then suture the wrap along the edge of the cotton, leave a return mouth that can extend in the hand, about 12cm.
Step 12 –
Turn the bag from the front to the front, and then use a hidden needle or a flat needle sewing to return the mouth. About 0.2cm along the mouth of the bag, and then the car seam a circle of light lines. The color is best similar to the color of the bag body.
Step 13 –
The pumping rope or belt is clamped at the seam of the wrap, the seam is buckled, and the pumping rope above the zipper needs to be placed in the middle of the other sides.
Step 14 –
In addition, the two rectangular small cloths are cut, the size
Random, put the long side
The sewing is folded inward.
Step 15 –
Then facing the folding car seam, the side of the latter is not seamless
Put it in the tail of the tap, tighten the knot, then turn the cloth ring down to the front, and put in an appropriate amount to fill the cotton. The sewing below the cloth ring is folded at the hand, and the other sides of the other sides are also folded to the center point, so that the tulip on the bag will be ready.
Details of trend barrel bag