It is the season of night fishing again in summer. The darkness of the night is not clear. It is a big problem that needs to be solved. In the past, we chose nightlights at night, but it was inconvenient to carry and use the night illumination lights, and the light may be scared to scare the fish. As more and more people are rising, more and more people like to use luminous drift during night fishing. I am no exception than night lighting.
The luminous bleaching is really easy to use, but there is also a disadvantage of luminous drift that is the usual floating vagueness.
When we get a luminous drift, we can see that its drifting tail is much thicker than the normal tail. The data of the luminous drift is more than 1.2 mm. The tail of the luminous bleaching is like a thick tail. The thicker the floating tail, the greater the drainage of the water, the more blunt it is. So can we choose a thin tail? The merchant also has a thin luminous luminous drift, but its brightness is low after the tail is thin. If you fish with a short pole, you may not see the floating action if you fish with a long pole of more than 5.4 meters.
Another reason why the luminous drifting is not sensitive is that the luminous drifting is too heavy. The luminous power supply rely on the battery they carried by itself. The weight of the battery will increase the self -weight of the float. The float is naturally blunt.
These two factors lead to the same size of our luminous ratio. However, fishermen do not have to worry. On the summer night, the temperature is suitable for fish. The fish is very active and strong, and it will not affect the fish mouth. And in summer, we must make the fishing group blunt.
In addition to the disadvantages of the luminous bleaching, there is also a disadvantage of the connection between the drifting tail and the drifting body. Because the drifting tail is hollow, it needs to be fixed when it connects the drifting body. Originally, the drifting tail was thick and fixed materials, and the connection was thicker. And the problem of this connection is also easy to have problems, and it is easy to cause drifting tails to fall off if it is often used or too fierce to lift the pole.
Although luminous drift has these disadvantages, it is acceptable compared to the advantages of night fishing. When we choose the luminous drift, we can choose some of the lapse of luminous bleaching to make up for its shortcomings.
Choose the luminous drift first to see the drifting tail. We can choose the thickness of the drifting tail according to the length of the fishing rod, and use the short pole to drift the tail thinner. If the long rod is used, we must choose a thicker drift. In addition to the thickness of the drifting tail, we’d better choose a cold light or waterless drift tail. This kind of drifting tail has no reflection in the water to make us observe more accurate.
The second thing to pay attention to when choosing luminous drift is the self -weight of the float. Because the luminous drift needs to bring its own battery, the self -weight that wants to reduce the float must work hard on the battery. In the past, luminous drifts used the battery of No. 425. This battery was relatively large and heavier. Now there are some small batteries, such as 322, 316 and other models. These batteries are much lighter than the battery 425. We can choose to use the float of a small battery. However, the characteristic of this float is that the battery life needs to be replaced frequently.
The above points are that we need to pay special attention to the choice of luminous drift. Others, such as the choice of drifting, the length of the drifting tail, and the length of the drifting feet, are much worse than the choice of ordinary floats. Fishermen can choose according to their own experience.