Used:
American wool (220 yards/100 grams), dosage 1 twisted
density:
A twist cycle (22 stitches) = 9.5cm (large needle, after setting)
24 circle = 10cm (Twist pattern, large needle, after setting)
Use needle:
3.75mm and 4.5mm needles of 40cm, a set of 4.5mm double -headed stitches
size:
Hat enclosure 47.5cm, hat depth 23cm
Weaving terminology:
C1/1r:
Slide 1 needle to twist need
C1/1L:
Slide 1 needle to twist need
C1/2R:
Slide 1 needle to twist need
C2/1L:
Slide 2 needles to twist needles, and place it on the front side, 1 under 1, 2 stitches on the twist needle
C1/2rp:
Slide 1 needle to twist need
C2/1LP:
Slide 2 needles to twist needles, and place it on the front side, 1 on the one, the 2 stitches on the twist needle
C2/2R:
Slide 2 needles to twist needles, and place it on the back, 2 tack, 2 needles on the twist needle
C1/1/2rp:
Slide 2 needles to twist needles, and place it on the back, slide 1 to the second twist need 2 stitches knitting lower needle
C1/1/2LP:
Slide 2 needles to twist needles, and place it on the front, slide 1 needle to the second twist need 2 stitches knitting lower needle
Pattern weaving method
2, the threads on 2 (the number of stitches of a circle is 4):
Circle 1:*2 under, 2, from*to end
Repeat circle 1
Weaving method:
Use waste lines and hook needles, as well as a small ring needle, use a temporary needle method to start 51 stitches, do not connect into a ring, connect to normal woven wires
Line 1 (front):*1, empty needle, repeat from*to the last 1 needle, 1. -101 needle
Ring 2 (reverse):*Line slides 1 needle on the front side, 1 down, repeated from*to the last 1 needle, and the line slides 1 needle on the front side.
Line 3:*1, the line slides 1 needle on the front side, from*to the last 1 needle, 1 lower
Line 4:*Line slides 1 needle on the front side, 1 tack, repeated from*to the last 1 needle, now the front side slides 1 needle
Adjust the needle eyes to 2 times, the thread needle on the 2
Line 5:*1, slide 1 needle to twist needles and place it on the back, 1 under 1, 1 needle on the tweeter on the twist needle, 1 on, repeat from*to the last 1 needle, slide 1 needle on the front side Essence
Place the mark on the beginning of a circle, connect into a ring, don’t twist
Next lap (needle reduction): From the right stick to the needle to skate 1 needle to the left stick, the lower left of the lower needle 2, 1 down, 2,*2 down, 2 on the end, from*to the end. The starting position of the marking deduction is a lap. —— 100 stitches
Brim
Weaving 2, the double threads on the 2 on the 2 (from the side).
Switch
main body:
1-39 lap of Cable Pattern. ——The 110 stitches after circle 1, 80 stitches after 39 laps.
Circle 40 (needle reduction):*2 down, upper needle 2 and 1, 1, 1, 2 down, upper needle 2, 1, 1, 1, repeat 3 times from*3 times, 3 times , 2 times, upper needle 2 and 1, 1, 2, 2, 2, 1, 1, 1, remove the right stick needle, remove the mark buckle, put these 3 stitches back to Left stick needle, put the mark buckle -70 stitches.
Circle 41:*C2/1/2RP, 2, from*to end
Circle 42 (needle reduction):*2 down, 1 up, 2 down, upper need
Circle 43 (reducing needle):*lower needle 2 with 1, 1, upper and 1 on the right of the lower needle, from*to the end -40 needles
Circle 44 (reducing needle):*The upper right of the lower needle is 1, from*to the end -20 stitches
Circle 45 (reducing needle):*The upper right of the lower needle is 1, from*to the end -10 needles
Circle 46: All needles
Finish
Break the wire, leave a 20cm wire head, and put the line head into the remaining needle.
Make a 5cm diameter hair ball and fix it on the top.